About Us

A wide spectrum of
technical services

EcoTech is a professional trading company with high expertise in fluid pumping and aeration technology, specialized in the supply of water treatment equipment in GCC and Middle East Countries.

We offer modern technology and environmental friendly products to most private, industrial and governmental sectors.

EcoTech provides a wide spectrum of technical services, including consultancy on pumps and aerators selection for system design and technical specifications, on-site techni­cal support and system commissioning etc.

More About Us

Be Unique in Pump Selection with EcoTech

EcoTech is a trading company with high expertise in pumping and aeration technology, pumps, airblowers, belt presses and mixers. We offer modern technology and environmental friendly quality products to most private, industrial and governmental sectors.

Since the foundation in 1954, ARBO Pumps | Filters specialized on the design and production of sustainable,

Read More
  • Dry running protector
  • Pressure gauges
  • Priming units
  • Dry running resistant
  • Compact design
  • Max. 300 m³/h, max. 90 m
  • Plastic casing/impeller
  • Self-priming option
  • Max. 60 m³/h, max. 90 m
  • Plastic casing/impeller
  • Self-priming option
  • Max. 600 m³/h, max. 90 m

bestUV is an innovative manufacturer of ultraviolet (UV) water treatment systems for professional market segments like:

Read More
  • Compact L-shaped UV
  • Low-pressure UV lamps
  • 254 nm wavelength
  • L-shaped UV system
  • Low-pressure UV lamp
  • 254 nm wavelength
  • Compact inline UV system
  • Low head-loss
  • Controller sensors
  • Compact inline UV system
  • Wavelength up to 400 nm
  • Motor-driven cleaning
  • Compact L-shaped system
  • Efficient, W/L: 254 nm
  • Low-pressure UV lamps
  • L-shaped UV system
  • Simple installation
  • 254 nm wavelength
  • Compact Inline UV system
  • High efficiency
  • Low-pressure UV lamps
  • Compact inline UV system
  • Low head-loss
  • Power Control System

Mixers designed for livestock slurry, biogas, sewage and civil/industrial effluent processing plants, with planetary gearbox,

Read More
  • TBX- Stainless steel
  • Motor power: 0.75-3 kW
  • Axial thrust:117-373 N
  • Submersible AF series
  • Motor power: 1.5-5.5 kW
  • Axial thrust:1226-2943N
  • TBM-TBMex series
  • Motor power: 1.5-2.5 kW
  • Axial thrust:230-5369N
  • Chopper PTSH series
  • Hydraulic motor: 25 kW
  • Q: 380 m³/h, H: 26 m
  • EPO 200 series
  • Motor power: 22-45 kW
  • Q: 720 m³/h, H: 22 m
  • PTE-PTEM series
  • Motor power: 4-22 kW
  • Q: 340 m³/h, H: 53 m
  • PTS 200/PS 200 series
  • Motor power: 15-30 kW
  • Q: 720 m³/h, H: 22 m
  • PTS/PTSex 100-150 series
  • Motor power: 4-18.5 kW
  • Q: 340 m³/h, H: 21 m

Design, manufacture and marketing of a wide range of industrial agitators. We are specialists in techniques and mixtures of liquids and fluids.

Read More
  • Tanks 10-500 m3
  • Motor: 0.75kW to 7.5kW
  • Speed 200 rpm
  • For big tanks
  • Motor: 0.25kW to 3kW
  • Speed 5 to 40 rpm
  • Flocculation
  • Motor: 0.18kW to 15kW
  • Speed 5 to 50 rpm
  • For big tanks
  • Motor: 0.55kW to 45kW
  • Speed 30 to 150 rpm
  • For big tanks
  • Motor: 0.55kW to 45kW
  • Speed 30 to 150 rpm
  • Tanks 10-100 m3
  • Motor: 2.2kW to 75kW
  • Speed 20 to 120 rpm
  • Tanks 4-15 m3
  • Motor: 0.37kW to 2.2kW
  • Speed 75 to 150 rpm
  • Tanks 0.5-5 m3
  • Motor: 0.18kW to 2.2kW
  • Speed 300 rpm

For two generations, the culture of HOMA as a family company has been grounded in clear goals and structures.

Read More
  • HBP501-HBP555
  • Flow: 71m³/h, Head: 32m
  • Motor Output: 0.7-1.5kW
  • TP30
  • Flow: 42m³/h, Head: 19m
  • Motor Output: 0.7-1.6kW
  • TP28
  • Flow: 25m³/h, Head: 13m
  • Motor Output: 0.7-1.1kW
  • TP48
  • Flow:3 5m³/h, Head: 14m
  • Motor Output: 1.1-1.5kW
  • H16
  • Flow: 20.5m³/h,Head:11m
  • Motor Output: 0.6-1.1kW
  • H501/H511
  • Flow: 36m³/h, Head:16.5m
  • Motor Output: 0.8-3.0kW
  • H307/H313/H328 V
  • Flow: 25m³/h, Head: 12m
  • Motor Output: 0.5-1.2kW
  • H119/H121
  • Flow: 63m³/h, Head: 21m
  • Motor Output: 1.2-2.7kW

Nova rotors was founded in 1990. Nowadays we are a national benchmark in the manufacturing and selling progressing cavity pumps, wobble pumps and flexible impeller.

Read More
  • Max. Q: 400m³/h, P:48bar
  • Max. T: 180°C, NPSHr:3m
  • Model: 025 to 300
  • Max. Q: 400m³/h, P:48bar
  • Max. T.: 180°C, NPSHr:3m
  • Model: 025 to 300
  • Max. Q: 3.6m³/h, P:6bar
  • Max. T.: 80°C, NPSHr:4m
  • Model: R24 to R68
  • Max. Q: 6m³/h, P:6bar
  • Max. T.: 80°C, NPSHr:4m
  • Model: R24 to R88
  • Max. Q: 400m³/h, P:48bar
  • Max. T.: 180°C, NPSHr:3m
  • Model: 025 to 300
  • Max. Q: 200m³/h, P:48bar
  • Max. T.: 180°C
  • Model:SH120-4 to 520-1
  • Max. Q: 400m³/h, P:48bar
  • Max. T.: 180°C, NPSHr:3m
  • Model: 020-2 to 520-1
  • Max. Q: 3m³/h, P:24bar
  • Max. T.: 180°C, NPSHr:3m
  • Model: 010-2 to 022-1

PRIMIX is a global company that provides industrial solutions for mixing liquids and/or gases without rotating parts

Read More
  • Stainless Steel 316L or PVC
  • More than 10,000 variants
  • Tailored to your flow rates

 

  • Mixing gases
  • Large tube dia.
  • ±50 mm dia. to infinity
  • High viscosity mixing
  • Wide range of sizes
  • Relative high pressure
  • Liquid and gas mixing
  • ±160mm dia. to infinity
  • Improve heat transfer
  • Liquid and gas mixing
  • Up to ±160mm diameter
  • Improve heat transfer

Seft srl was founded in 1988 as a precision mechanical workshop specializing in power transmissions, subsequently it began to build the first screw conveyors. From here began the business conversion process to the construction and sale of machines and plants for the mechanical treatment of wastewater, up to offer a wide range of serviceable solutions for every type of plant, municipal and industrial.

Today S has a structure of 2,500 square meters where 45 people work in synergy, our equipment are installed all over the world.

In over 30 years we have gained high level of experience and expertise in the field, we have always been up to date and followed the evolution of the new technologies of design and construction, to obtain a high quality standard certified by TUV Nord ISO 9001. We offer a complete service and efficient from consulting to installation of the machines produced and is completed by the after-sales service.

Engineering & Design department:

Within the company we have created a Technical Office of Research and Development for a continuous and constant improvement of the machines produced.

Eight professional figures, including engineers and designers, are available to customize and design, also in cooperation with the customer, the machines and equipment according to individual needs. Our design software is Solidworks, this system allows us to operate following a consumer-oriented strategy and ensure an ideal product.

Production department:

The internal production includes the laser cutting of sheet metal, the materials mainly used are stainless steal 304L and 316L, unless otherwise requested by the customer. We have a cutting area of 2000mmx4000mm.

This technology allows us to carry out the following phases with remarkable precision to the advantage of product quality, bending is performed with CNC bending machines.

Welding:

The welding area is divided into two sectors: the first six positions, with as many specialized operators, are dedicated to TIG MIG wire welding for small and large thicknesses, mainly using stainless steel.

The second sector deals with the welding of coils, used in many of our machines, such as the screw screen, combined units, grit removal in addition to the screw conveyors of various sizes and materials (carbon steel or stainless steel).

Assembly and Testing:

After performing the above operations, the assembly phase begins. Our fitters have high knowledge and experience of every single machine produced, more than 45 models with multiple versions are available in the catalogue of ours wastewater treatment equiment. Our staff is constantly updated on product improvements, both for improvements, both for standard and customized equipment.

At the end of each assembly process, before proceeding with the preparation of the shipment, the machines are tested.

Customer service:

For Seft care and attention to detail is a very important phase, we pay particular attention to the finishing treatments, we perform micro-shot peening and pickling treatments to protect welds made and to an aesthetic aspect that is sure to be appreciated.

Shipping and Installation:

All machines are carefully packed for shipping. Our staff is prepared to manage and follow logistics around world by any means of transport: by land, by sea or air.
With a qualified team, we can offer the installation and commissioning service of the machines in the places of use. Seft offers the possibility to arrange regular and extraordinary maintenance services.

Read More

The pumps and aerator technology that the world trusts. Tsurumi introduced its overseas strategy in the 1960s.

Read More
  • BZ-Channel Impeller
  • Discharge Bore:80-350mm
  • Motor Output: 1.5-75kW
  • C-Cutter Impeller
  • Discharge Bore:50-200mm
  • Motor Output: 0.75-37kW
  • U series vortex impeller
  • Discharge Bore: 40-80mm
  • Motor Output:0.25-3.7kW
  • KTVE-Automatic
  • Discharge Bore:50-100mm
  • Motor Output:0.75-5.5kW
  • KTZ series
  • Discharge Bore:50-150mm
  • Motor Output: 1.5-15kW
  • HSZ-Float switch
  • Discharge Bore: 50-80mm
  • Motor Output: 0.4-0.75kW
  • KTV series
  • Discharge Bore:50-100mm
  • Motor Output:0.75-5.5kW
  • UZ series vortex impeller
  • Discharge Bore: 50-100mm
  • Motor Output: 1.5-11kW
  • All
  • Arbo
  • Bestuv
  • Cri-man
  • FLUIDMIX
  • Homa
  • Nova Rotors
  • Primix
  • Tsurumi
Static Mixers
  • Stainless Steel 316L or PVC
  • More than 10,000 variants
  • Tailored to your flow rates

 

Submersible Pumps
  • BZ-Channel Impeller
  • Discharge Bore:80-350mm
  • Motor Output: 1.5-75kW
Submersible Pumps
  • C-Cutter Impeller
  • Discharge Bore:50-200mm
  • Motor Output: 0.75-37kW
Submersible Pumps
  • U series vortex impeller
  • Discharge Bore: 40-80mm
  • Motor Output:0.25-3.7kW
Dewatering Pumps
  • KTVE-Automatic
  • Discharge Bore:50-100mm
  • Motor Output:0.75-5.5kW
Dewatering Pumps
  • KTZ series
  • Discharge Bore:50-150mm
  • Motor Output: 1.5-15kW
Dewatering Pumps
  • HSZ-Float switch
  • Discharge Bore: 50-80mm
  • Motor Output: 0.4-0.75kW
Dewatering Pumps
  • KTV series
  • Discharge Bore:50-100mm
  • Motor Output:0.75-5.5kW
Submersible Pumps
  • UZ series vortex impeller
  • Discharge Bore: 50-100mm
  • Motor Output: 1.5-11kW
Grinder Pumps
  • MG series
  • Discharge Bore: 32-50mm
  • Motor Output: 1.0-3.7kW
Resin-Made Pumps
  • PU-Vortex Impeller
  • Discharge Bore: 40-80mm
  • Motor Output: 0.15-3.7kW
Resin-Made Pumps
  • PN-Vortex Impeller
  • Discharge Bore: 40-80mm
  • Motor Output:0.25-3.7kW
Dewatering Pumps
  • LB-Portable
  • Discharge Bore: 50-80mm
  • Motor Output:0.48-1.5kW
Dewatering Pumps
  • Portable LB-A-Automatic
  • Discharge Bore: 50-80mm
  • Motor Output:0.48-0.75kW
Dewatering Pumps
  • KRS series
  • Discharge Bore:80-250mm
  • Motor Output: 2.2-22kW
Dewatering Pumps
  • KRS Energy-Saving
  • Discharge Bore:100-200mm
  • Motor Output: 3-9kW
Resin-Made Pumps
  • PSF-High-Head
  • Discharge Bore: 40-65mm
  • Motor Output: 0.25-3.7kW
High-Head Pumps
  • SF-Semi-Open Impeller
  • Discharge Bore: 50-80mm
  • Motor Output: 0.75-11kW
Resin-Made Pumps
  • OM-Vortex Impeller
  • Discharge Bore: 32mm
  • Motor Output: 0.15kW
Submersible SS Pumps
  • SFQ series
  • Discharge Bore: 50-80mm
  • Motor Output: 0.4-11kW
Dewatering Pumps
  • High-Head GSZ-4 series
  • Discharge Bore:150-250mm
  • Motor Output: 37-150kW
Dewatering Pumps
  • LH-High Head
  • Discharge Bore:80-200mm
  • Motor Output: 3-110kW
Slurry Pumps
  • HSD series
  • Discharge Bore: 50mm
  • Motor Output: 0.55kW
Slurry Pumps
  • NKZ series
  • Discharge Bore:80-150mm
  • Motor Output: 2.2-11kW
Titanium Pumps
  • TM-Vortex Impeller
  • Discharge Bore: 40-80mm
  • Motor Output:0.25-3.7kW
Submersible Aerators
  • TRN-Self-Aspirating
  • Air-inlet Bore:32-150mm
  • Motor Output:0.75-40kW
Submersible Ejectors
  • BER-Self-Aspirating
  • Discharge Bore: 25-50mm
  • Motor Output:0.75-5.5kW
Decanter Skimmer
  • Floating FSP series
  • Discharge Bore: 50mm
  • Motor Output:0.4-0.75kW
Slurry Pumps
  • GPN series
  • Discharge Bore: 80-200mm
  • Motor Output: 5.5-37kW
Dewatering Pumps
  • High-Head GSZ-6 series
  • Discharge Bore: 200mm
  • Motor Output: 22-37kW
Dewatering Pumps
  • LH-W-High-Head
  • Discharge Bore: 50-100mm
  • Motor Output: 3-110kW
Dewatering Pumps
  • LSC-Portable
  • Discharge Bore: 25mm
  • Motor Output: 0.48kW
Submersible Pumps
  • UT series vortex impeller
  • Discharge Bore: 40-50mm
  • Motor Output:0.25-0.75kW
Slurry Pumps
  • KRS (Slurry) series
  • Discharge Bore:80-200mm
  • Motor Output: 4-18kW
Slurry Pumps
  • KTD series
  • Discharge Bore:50-80mm
  • Motor Output: 2-3kW
Slurry Pumps
  • KTV (Slurry) series
  • Discharge Bore:50-100mm
  • Motor Output: 2-3kW
Dewatering Pumps
  • KTZE-Automatic
  • Discharge Bore:50-100mm
  • Motor Output:1.5-3.7kW
Submersible SS Pumps
  • LH-14-High-Head
  • Discharge Bore:100-200mm
  • Motor Output: 22-110kW
Submersible SS Pumps
  • LH-W-14-High-Head
  • Discharge Bore: 50-100mm
  • Motor Output: 3-110kW
High-Head Pumps
  • Tandem Operation
  • Discharge Bore:50-100mm
  • Motor Output: 3-30kW

 

Dewatering Pumps
  • Portable NK series
  • Discharge Bore: 50-80mm
  • Motor Output: 1.5-2.2kW
Dewatering Pumps
  • Portable HS series
  • Discharge Bore: 50-80mm
  • Motor Output: 0.4-0.75kW
Dewatering Pumps
  • HSR-Portable
  • Discharge Bore: 50mm
  • Motor Output: 0.4kW
Floating Decanters
  • FHP series
  • Discharge Bore: 40-80mm
  • Motor Output:0.25-1.5kW
Automatic Bar Screens
  • KE/KS/KW series
  • Bar Spacing: 1-50mm
  • Motor Output: 0.09-0.1kW
Automatic Bar Screens
  • KM series
  • Bar Spacing: 2-50mm
  • Motor Output: 0.1kW
Dewatering Pumps
  • LSP-Self-Priming
  • Discharge Bore: 25×25
  • Motor Output: 0.48kW
Drainage Pumps
  • HBP501-HBP555
  • Flow: 71m³/h, Head: 32m
  • Motor Output: 0.7-1.5kW
Submersible Pumps
  • TP30
  • Flow: 42m³/h, Head: 19m
  • Motor Output: 0.7-1.6kW
Submersible Pumps
  • TP28
  • Flow: 25m³/h, Head: 13m
  • Motor Output: 0.7-1.1kW
Submersible Pumps
  • TP48
  • Flow:3 5m³/h, Head: 14m
  • Motor Output: 1.1-1.5kW
Drainage Pumps
  • H16
  • Flow: 20.5m³/h,Head:11m
  • Motor Output: 0.6-1.1kW
Drainage Pumps
  • H501/H511
  • Flow: 36m³/h, Head:16.5m
  • Motor Output: 0.8-3.0kW
Drainage Pumps
  • H307/H313/H328 V
  • Flow: 25m³/h, Head: 12m
  • Motor Output: 0.5-1.2kW
Drainage Pumps
  • H119/H121
  • Flow: 63m³/h, Head: 21m
  • Motor Output: 1.2-2.7kW
Drainage Pumps
  • H106/H117
  • Flow: 23m³/h, Head: 11m
  • Motor Output: 0.5-1.1kW
Drainage Pumps
  • CR360/CR372 V
  • Flow: 25m³/h, Head: 12m
  • Motor Output: 0.45-2.2kW
Drainage Pumps
  • CR253
  • Flow: 10m³/h, Head: 8m
  • Motor Output:0.34-0.53kW
Drainage Pumps
  • CH413
  • Flow: 23m³/h, Head: 12m
  • Motor Output: 0.7-1.2kW
Drainage Pumps
  • CH250/CH260
  • Flow: 16m³/h,Head:11.5m
  • Motor Output:0.26-0.90kW
Drainage Pumps
  • C80 W
  • Flow: 3m³/h, Head: 3m
  • Motor Output:0.04-0.08kW
Drainage Pumps
  • C250 WE
  • Flow: 12m³/h, Head: 8m
  • Motor Output:0.26-0.55kW
Drainage Pumps
  • C250/C260
  • Flow: 15.5m³/h, Head:11.5m
  • Motor Output:0.25-0.50kW
Drainage Pumps
  • C240W Flat
  • Flow: 10m³/h, Head: 8m
  • Motor Output:0.25-0.50kW
Drainage Pumps
  • C240 WF/C270 WF
  • Flow: 10m³/h, Head: 10m
  • Motor Output:0.25-0.70kW
Drainage Pumps
  • C237 W3
  • Flow: 11m³/h, Head: 8m
  • Motor Output:0.28-0.47kW
Drainage Pumps
  • BULLY CH140
  • Flow: 6.5m³/h, Head: 7m
  • Motor Output:0.17-0.32kW
Drainage Pumps
  • Bully C140/C150
  • Flow: 12m³/h, Head: 10m
  • Motor Output:0.17-0.75kW
Submersible Pumps
  • TP53 V
  • Flow: 59m³/h, Head: 21m
  • Motor Output: 0.8-5.2kW
Submersible Pumps
  • TP53 M
  • Flow: 81m³/h, Head: 31m
  • Motor Output: 0.8-5.2kW
Submersible Pumps
  • TP50 V
  • Flow: 59m³/h, Head: 21m
  • Motor Output: 0.8-5.2kW
Submersible Pumps
  • TP50 M
  • Flow: 81m³/h, Head: 31m
  • Motor Output: 0.8-5.2kW
Sewage Pumps
  • Submersible TCV/TCM
  • Flow: 48m³/h, Head: 15m
  • Motor Output: 0.8-2.4kW
Aggressive Liquids
  • CPT50/CPT53/CPT70
  • Flow: 97m³/h, Head: 31m
  • Motor Output: 1.0-5.2kW
Sewage Cutter Pump
  • GRP56/GRP76/GRP111
  • Flow: 31m³/h, Head: 68m
  • Motor Output: 6.4-11kW
Sewage Cutter Pump
  • GRP16/GRP36/GRP50
  • Flow: 28m³/h, Head: 52m
  • Motor Output: 0.9-5.2kW
Sewage Cutter Pump
  • GRP10/GRP50
  • Flow:14.3m³/h, Head: 52m
  • Motor Output: 0.8-5.2kW
PG Hopper Pumps
  • Max. Q: 400m³/h, P:48bar
  • Max. T: 180°C, NPSHr:3m
  • Model: 025 to 300
PG Industrial Pumps
  • Max. Q: 400m³/h, P:48bar
  • Max. T.: 180°C, NPSHr:3m
  • Model: 025 to 300
PG SS Wobble Pumps
  • Max. Q: 3.6m³/h, P:6bar
  • Max. T.: 80°C, NPSHr:4m
  • Model: R24 to R68
PG Cast Iron Pumps
  • Max. Q: 6m³/h, P:6bar
  • Max. T.: 80°C, NPSHr:4m
  • Model: R24 to R88
PG DX-JX Pumps
  • Max. Q: 400m³/h, P:48bar
  • Max. T.: 180°C, NPSHr:3m
  • Model: 025 to 300
PG Hopper Pumps
  • Max. Q: 200m³/h, P:48bar
  • Max. T.: 180°C
  • Model:SH120-4 to 520-1
PG Flanged Pumps
  • Max. Q: 400m³/h, P:48bar
  • Max. T.: 180°C, NPSHr:3m
  • Model: 020-2 to 520-1
PG Dosing Pumps
  • Max. Q: 3m³/h, P:24bar
  • Max. T.: 180°C, NPSHr:3m
  • Model: 010-2 to 022-1
PG diamond series
  • Max. Q: 400m³/h, P:48bar
  • Max.T.: 180°C, NPSHr:3m
  • Model: 30 to 300
Philine UV
  • Compact L-shaped UV
  • Low-pressure UV lamps
  • 254 nm wavelength
HPS Series Agitator
  • Tanks 10-500 m3
  • Motor: 0.75kW to 7.5kW
  • Speed 200 rpm
VFT Series Agitator
  • For big tanks
  • Motor: 0.25kW to 3kW
  • Speed 5 to 40 rpm
VFR Series Agitator
  • Flocculation
  • Motor: 0.18kW to 15kW
  • Speed 5 to 50 rpm
VPS Series Agitator
  • For big tanks
  • Motor: 0.55kW to 45kW
  • Speed 30 to 150 rpm
VPT Series Agitator
  • For big tanks
  • Motor: 0.55kW to 45kW
  • Speed 30 to 150 rpm
VTG Series Agitator
  • Tanks 10-100 m3
  • Motor: 2.2kW to 75kW
  • Speed 20 to 120 rpm
VTS Series Agitator
  • Tanks 4-15 m3
  • Motor: 0.37kW to 2.2kW
  • Speed 75 to 150 rpm
VPP Series Agitator
  • Tanks 0.5-5 m3
  • Motor: 0.18kW to 2.2kW
  • Speed 300 rpm
VHD Series Agitator
  • Tanks 200-3000 liters
  • Motor: 0.18kW to 1.5kW
  • Speed 750,1000,1500 rpm
VHS Series Agitator
  • Tanks 50-1000 liters
  • Motor: 0.12kW to 0.55kW
  • Speed 750,1000,1500 rpm
SS Submersible Mixer
  • TBX- Stainless steel
  • Motor power: 0.75-3 kW
  • Axial thrust:117-373 N
flow booster
  • Submersible AF series
  • Motor power: 1.5-5.5 kW
  • Axial thrust:1226-2943N
Submersible mixer
  • TBM-TBMex series
  • Motor power: 1.5-2.5 kW
  • Axial thrust:230-5369N
Submersible pumps
  • Chopper PTSH series
  • Hydraulic motor: 25 kW
  • Q: 380 m³/h, H: 26 m
Chopper pumps
  • EPO 200 series
  • Motor power: 22-45 kW
  • Q: 720 m³/h, H: 22 m
chopper pumps
  • PTE-PTEM series
  • Motor power: 4-22 kW
  • Q: 340 m³/h, H: 53 m
chopper pumps
  • PTS 200/PS 200 series
  • Motor power: 15-30 kW
  • Q: 720 m³/h, H: 22 m
chopper pumps
  • PTS/PTSex 100-150 series
  • Motor power: 4-18.5 kW
  • Q: 340 m³/h, H: 21 m
chopper pumps
  • PTS 65-PTSex 65 series
  • Motor power: 7.5-11 kW
  • Q: 110 m³/h, H: 29 m
H. Axis propeller pump
  • ER series
  • Motor power:2.2-18.5kW
  • Q: 4500 m³/h, H: 1.8 m
chopper dry pumps
  • ETV 80-150 series
  • Motor power: 2.2-22 kW
  • Q: 340 m³/h, H: 54 m
chopper pumps
  • ETO 65-200 series
  • Motor power: 2-45 kW
  • Q: 720 m³/h, H: 106 m
Vertical pumps
  • Flushing  PTE 250 series
  • Motor power: 11-30 kW
  • Q: 1080 m³/h, H: 16 m
Submersible pumps
  • Flushing PS 250 series
  • Motor power: 11-45 kW
  • Q: 1400 m³/h, H: 24 m
Submersible pumps
  • Chopper PTS 100K series
  • Motor power: 5-45 kW
  • Q: 260 m³/h, H: 51 m
chopper pumps
  • PTS 80-PTSex 80 series
  • Motor power:2.2-18.5kW
  • Q: 160 m³/h, H: 46 m
Submersible pumps
  • Chopper PTS 40 series
  • Motor power:0.75-1.1kW
  • Q: 26 m³/h, H: 17 m
V – Elements
  • Mixing gases
  • Large tube dia.
  • ±50 mm dia. to infinity
X Crossed – Elements
  • High viscosity mixing
  • Wide range of sizes
  • Relative high pressure
Quatro – Elements
  • Liquid and gas mixing
  • ±160mm dia. to infinity
  • Improve heat transfer
Spiral – Elements
  • Liquid and gas mixing
  • Up to ±160mm diameter
  • Improve heat transfer
VTA Series Agitator
  • Tanks 1-4 m3
  • Motor: 0.37kW to 2.2kW
  • Speed 75 to 150 rpm
Gammaline UV
  • L-shaped UV system
  • Low-pressure UV lamp
  • 254 nm wavelength
Sigmaline UV
  • Compact inline UV system
  • Low head-loss
  • Controller sensors
DeltaLine UV
  • Compact inline UV system
  • Wavelength up to 400 nm
  • Motor-driven cleaning
Betaline-E UV
  • Compact L-shaped system
  • Efficient, W/L: 254 nm
  • Low-pressure UV lamps
Betaline UV
  • L-shaped UV system
  • Simple installation
  • 254 nm wavelength
Kappaline UV
  • Compact Inline UV system
  • High efficiency
  • Low-pressure UV lamps
Alfaline UV
  • Compact inline UV system
  • Low head-loss
  • Power Control System
Pump protection
  • Dry running protector
  • Pressure gauges
  • Priming units
Immersible pump
  • Dry running resistant
  • Compact design
  • Max. 300 m³/h, max. 90 m
Magnetic drive pump
  • Plastic casing/impeller
  • Self-priming option
  • Max. 60 m³/h, max. 90 m
End suction pump
  • Plastic casing/impeller
  • Self-priming option
  • Max. 600 m³/h, max. 90 m

Our Locations

EcoTech is located in UAE and Saudi Arabia. Our head office is located in Hamriyah Free Zone in UAE

EcoTech FZC

Warehouse No. 1K-06/2 Hamriyah Free Zone Phase 1, Sharjah-UAE

info@ecotechfzc.ae

+971 (4) 4276693

www.ecotech-trading.com

License no.: 8210

EcoTech DMCC

Office No.: 33F, Silver Tower, Cluster I, JLT, Dubai-UAE

info@ecotechfzc.ae

+971 (4) 4276693

License no.: DMCC-354987

EcoTech Trading Establishment

Office & Showroom Al Shaya Center, Al-Baladiah Street Jeddah-KSA

+966 50 705 7583

info@ecotechfzc.ae

EcoTech Trading Establishment

Office & Showroom Al-Rail Plaza, Omar Al-Mukhtar Street Riyadh-KSA

+966 50 507 7583

info@ecotechfzc.ae

Latest Insights

EcoTech is located in UAE and Saudi Arabia. Our head office is located in Hamriyah Free Zone in UAE.

View All News