Submersible Mixers



Mixing, Agitating, Dissolving, Sludge homogenisation, Storm water tanks, Suspension of sediments or swimming covers also in pump pits, Mixing of chemicals and high, viscosity liquids, Fish farming, Flow generation, Cooling basins.


Propeller (Stainless steel 1.4436) Motor- /Propellershaft (Stainless steel 1.4462) Motor housing (Stainless steel 1.4436) Motor bearing cover (Stainless steel 1.4436) Bolts (Stainless steel) Elastomeres (Viton) Cable jacket (Polyolefine) Installation system (Stainless steel 1.4571) Mechanical seal on medium side (SiC / SiC) Mechanical seal on motor side (SiC / SiC) Upper Bearing (Deep Groove Ball Bearing) Lower Bearing (Double row angular ball bearing)


Electric motors, with 4-6 pole motor speed. Insulation class H, degree of protection IP 68.Thermal sensors embedded in the stator winding protect the motor from overheating. PTC sensors on request. With seal probe in oil chamber.


The shaft seal with two mechanical seals (back to back) made from corrosion-resistant SiC/SiC, combined with two additional radial shaft sealing rings, which run on the carbon coated propeller hub, guarantee Optimum protection against the ingress of media and solids


Robust stainless steel mixer made entirely of stainless steel cast and thus particularly suitable for use in corrosive liquids. Compact design by direct drive for installation in buildings with small space available. Suitable for installation on the basin floor due to small propeller diameters. Further mounting possibilities via system dependent lowering device in pump shafts and at basin walls. The production from high-quality components as well as standard monitoring devices within the stainless steel mixer ensure long service life and a high process reliability.


Installation and lifting device for individual mixer positioning and vertically adjustable.

Pumped Liquid

Max. medium temperature: 40 °C, short term up to 60 °C.


Robust, maintenance-free, permanently lubricated deep groove ball bearings/double row angular contact ball bearings.


2-blade propeller, self-cleaning design, stainless steel

Submersible Mixers
  • HRG
  • Motor power: 2.5-21kW
  • Speed: 1450 rpm
Submersible Mixers
  • HRS
  • Motor power: 1.2-6.1kW
  • Speed: 700/1400 rpm
Drainage Pumps
  • HBP501-HBP555
  • Flow: 71m³/h, Head: 32m
  • Motor Output: 0.7-1.5kW
Submersible Pumps
  • Flow: 43m³/h, Head: 16m
  • Motor Output: 0.7-1.5kW

Latest Insights

EcoTech is located in UAE and Saudi Arabia. Our head office is located in Hamriyah Free Zone in UAE.

View All News