Loading...

chopper pumps

PTS 80 – PTSex 80 Series

Type: Submersible chopper pumps

Fields of use:  LIVESTOCK BIOGAS INDUSTRY

 

Motor power 2.2 – 18.5 kW

Capacity 160 m³/h

Head 46 m

Multi-channel impeller and double chopping system.

  • Chopping system and anti-clogging screw
  • Max capacity: 160 m³/h (705 US gpm)
  • Head: 46 m (151 ft)
  • Motor power: 2.2 – 18.5 kW (3 – 26 HP)
  • Suction: 100 mm (4 inches)
  • Discharge: 80 mm (3 1/ 8 inches)

Submersible pumps

PTS 40 Series

Type: Submersible Chopper Pump

Fields of use: LIVESTOCK BIOGAS INDUSTRY

 

Motor power 0.75 – 1.1 kW

Capacity 26 m³/h

Head 17 m

Multi-channel impeller and double chopping system.

  • Chopping system
  • Max capacity: 26 m³/h (114 US gpm)
  • Head: 17 m (56 ft)
  • Motor power: 0.75 – 1.1 kW (1 – 1.5 HP)
  • Suction: 65 mm (2 9/16 inches)
  • Discharge: 40 mm (1 9/16 inches)

V – Elements

PMV Mixing Element

  • V shaped mixing element design
  • For static mixers with a diameter of approx. 50 mm to infinity
  • Very suitable for mixing gases or with large contact surface, mostly suitable for gas, but also for liquids
  • Suitable for large tube diameters
  • Suitable for short mixing lengths
  • Minimal space required for mixing or dispersion
  • Quick mass transfer through continuous renewal of the interfaces.

X Crossed – Elements

PMX Mixing Element

  • X-crossed type mixing element design
  • Suitable for static mixers of all sizes
  • Relative high pressure drop and not totally free from blind spots
  • Very suitable for high viscosity mixing
  • Very good mixing and dispersion – for a very wide range of viscosity
  • Reduction of product degradation
  • Provides for a compact design of the static mixer
  • Suitable for the mixing of sensitive products, with minimal friction tension
  • No deposits or accumulation of materials because of cross mixing.

Quatro – Elements

PMQ Mixing Element

  • Quatro shaped mixing element design
  • Performances equal to PMS
  • For static mixers with a diameter of approx. 160 mm to infinity
  • Suitable for basic mixing applications, liquids and gas.

Spiral – Elements

PMS Mixing Element

  • Standard screw, helical or spiral shaped mixing element. (comparable to Kenics design)
  • For static mixers with a diameter of up to approx. 160 mm
  • Suitable for basic mixing applications, liquids and gas.

VTA Series Agitator

VTA Series Industrial Agitator

The main characteristic of VTA4 mixers is their four foldable blades axial turbine. Axial turbine achieves a strong mixing effect in tanks from 1 to 4 m3 volume. Standard running speeds are 100 to 150 rpm. Thanks to their life greased reducer gear it is a friendly maintenance machine just to connect and run. VTA4 mixers can be equipped with more than one single turbine.

Main Features VTA Mixer:

  • For tanks 1 – 4 m3

  • Motor power: 0.37 kW to 2.2 kW.

  • Running speed 75 to 150 rpm.

  • 4 foldable blades axial turbine.

  • Shaft and propeller AISI 316.

Optional Extras:

  • Optional support for IBC/GRG tanks.
  • AISI 316 or PVC plate with oil seal.
  • Food industry execution, polished.
  • ATEX motors.
  • DIN or ANSI flanges.

Pump protection

Pump Protection

General Information

All products are machined of massive PP that covers a very wide range of duties – there is no metal to liquid contact. All reinforcement parts are made of SS-316. For highly abrasive liquids (high % of solids) parts of High modulus HMPE may be ordered. For highly corrosive mixtures at higher temperatures virgin PVDF is available.

Materials

Standard is the material PPH that covers a very wide range of duties. For highly corrosive mixtures at higher temperatures even a reservoir entirely made of PVDF may be offered. The standard priming unit has EPDM gaskets.