Category: FLUIDMIX

Design, manufacture and marketing of a wide range of industrial agitators. We are specialists in techniques and mixtures of liquids and fluids.

HPS Series Agitator

HPS Series Industrial Agitator

The HPS3 series are side entry mixers. They are very appreciate in wine industry, breweries, dairies, and mainly in big volume storage tanks from 10 to 500 m3, or even more, to keep non viscous liquids homogenously. A mechanical seal, normally silicon carbide/viton, ensures a leakage free work. The propeller is a 3 blades axial profile type S. Standard execution has a stainless steel DIN fixation flange. As option the mixer can be performed with an additional emergency sealing flange to avoid liquid leakages in case of any damage in the mechanical seal, until the seal can be repaired. A more sophisticated system, allows to do maintenance works (sealing change) without the need of emptying the tank.

 

Main Features HPS Mixer:

  • For tanks 10 – 500 m3
  • Motor power: 0.75 kW to 7.5 kW.
  • Running speed 200 rpm.
  • 3 blades axial profile
  • Diameters 400 to 660 mm.
  • Silicon carbide mechanical seal.
  • Shaft and propeller AISI 316, AISI 304

Optional Extras:

  • Emergency sealing flange.
  • Full tank maintenance device.
  • Food industry execution, polished.
  • ATEX motors.
  • ANSI flanges.
Download

VFT Series Agitator

VFT Series Industrial Agitator

VFT mixers are specific for flocculation process. They are equipped with two or three blades axial turbine blades with great blade surface, to develop a great flow rate at slow speed. Each VFT mixer is specially designed for an optimum adapting to the tank geometry. Longer than 6 meter shafts may be executed in two or more pieces. VFT mixers can have two or more propellers on the shaft. Flow direction and turning sense can be chosen.

 

Main Features VFT Mixer:

  • For big tanks.
  • Motor power: 0.25 kW to 3 kW.
  • Running speed 5 to 40 rpm.
  • 2/3 blades axial profile F type,
  • Diameters 400 to 4000 mm.
  • Shaft length up to 12000 mm.
  • Shaft and propeller AISI 316, AISI 304, carbon steel, rubber coated, special alloys.

Optional Extras:

  • AISI 316 or coated plate with oil seal.
  • Food industry execution, polished.
  • ATEX motors.
  • DIN or ANSI flanges.
Download

VFR Series Agitator

VFR Series Industrial Agitator

VFR3 flocculators have three blades axial profile S type. That profile performances a great pumping volume at low speed with a quite low absorbed power. They are suitable for big tanks, and can be optionally equipped with a lantern and any type of sealing, like stuffing box, dry or refrigerated mechanical seals, hydraulic labyrinth, etc. The VFR3 are custom made mixers, and each of them is studied and designed for their specific application. Reducer gears may be helical gears type, or parallel shaft. Longer than 6 meter shafts may be executed in two or more pieces. VFR3 mixers can have two or more propellers on the shaft. Flow direction and turning sense can be chosen.

 

Main Features VFR Mixer:

  • Flocculation.
  • Motor power: 0.18 kW to 15 kW.
  • Running speed 5 to 50 rpm.
  • 3 blades axial profile S type,
  • Diameters 400 to 4000 mm.
  • Shaft length up to 12000 mm.
  • Shaft and propeller AISI 316, AISI 304, carbon steel, rubber coated, special alloys.

Optional Extras:

  • AISI 316 or coated plate with oil seal.
  • Food industry execution, polished.
  • ATEX motors.
  • DIN or ANSI flanges.
  • Lantern with sealing: stuffing box, mechanical seal, hydraulic labyrinth.
Download

VPS Series Agitator

VPS Series Industrial Agitator

VPS3 mixers have three blades axial profile S type. That profile performances a great pumping volume with a quite low absorbed power. They are suitable for big tanks, and can be optionally equipped with a lantern and any type of sealing, like stuffing box, dry or refrigerated mechanical seals, hydraulic labyrinth, etc. The VPS are custom made mixers, and each of them is studied and designed for their specific application. Reducer gears may be helical gears type, or parallel shaft. Longer than 6 meter shafts may be executed in two or more pieces. VPS mixers can have two or more propellers on the shaft. Flow direction and turning sense can be chosen.

 

Main Features VPS Mixer:

  • For big tanks.
  • Motor power: 0.55 kW to 45 kW.
  • Running speed 30 to 150 rpm.
  • 3 blades axial profile T type,
  • Diameters 800 to 4000 mm.
  • Shaft length up to 12000 mm.
  •  Shaft and propeller AISI 316, AISI 304, carbon steel, rubber coated, special alloys.

Optional Extras:

  • AISI 316 or coated plate with oil seal.
  • Food industry execution, polished.
  • ATEX motors.
  • DIN or ANSI flanges.
  • Lantern with sealing: stuffing box, mechanical seal, hydraulic labyrinth.
  • Cooled fixation plate.
Download

VPT Series Agitator

VPT Series Industrial Agitator

VPT3 mixers have three blades axial profile T type. They are suitable for big tanks, and can be optionally equipped with a lantern and any type of sealing, like stuffing box, dry or refrigerated mechanical seals, hydraulic labyrinth, etc. The VPT are custom made mixers, and each of them is studied and designed for their specific application. Reducer gears may be helical gears type, or parallel shaft. Longer than 6 meter shafts may be executed in two or more pieces. VPT mixers can have two or more propellers on the shaft. Flow direction and turning sense can be chosen.

 

Main Features VTG Mixer:

  • For big tanks.
  • Motor power: 0.55 kW to 45 kW.
  • Running speed 30 to 150 rpm.
  • 3 blades axial profile T type,
  • Diameters 800 to 4000 mm.
  • Shaft length up to 12000 mm.
  • Shaft and propeller AISI 316, AISI 304, carbon steel, rubber coated, special alloys.

Optional Extras:

  • AISI 316 or coated plate with oil seal.
  • Food industry execution, polished.
  • ATEX motors.
  • DIN or ANSI flanges.
  • Lantern with sealing: stuffing box, mechanical seal, hydraulic labyrinth.
  • Cooled fixation plate.
Download

VTG Series Agitator

VTG Series Industrial Agitator

The main characteristic of VTG mixers is their four blades axial turbine. Axial turbine has a high power input ratio, and achieves a strong mixing effect in tanks from 10 to 100 m3 volume. The rotation sense of the turbine can be easily changed just changing motor power feed wires. Thanks to their life greased reducer gear it is a friendly maintenance machine just to connect and run. VTG mixers can be equipped with more than one single turbine.

 

Main Features VTG Mixer:

  • For tanks 10 – 100 m3.
  • Motor power: 2.2 kW to 75 kW.
  • Running speed 20 to 120 rpm.
  • 2/4 bladespitched axial turbine,
  • Shaft length according tank height
  • Shaft and propeller AISI 316, AISI 304, carbon steel, rubber coated.

Optional Extras:

  • AISI 316 or PVC plate with oil seal.
  • Food industry execution, polished.
  • ATEX motors.
  • DIN or ANSI flanges.
Download

VTS Series Agitator

VTS Series Industrial Agitator

The main characteristic of VTS4 mixers is their four blades axial turbine. Axial turbine has a high power input ratio, and achieves a strong mixing effect in tanks from 4 to 15 m3 volume. Standard running speeds are 75 to 150 rpm. The rotation sense of the turbine can be easily changed just changing motor power feed wires. Thanks to their life greased reducer gear it is a friendly maintenance machine just to connect and run. VTS4 mixers can be equipped with more than one single turbine.

 

Main Features VTS Mixer:

  • For tanks 4 – 15 m3
  • Motor power: 0.37 kW to 2.2 kW.
  • Running speed 75 to 150 rpm.
  • 4 blades pitched axial turbine,
  • Diameters 400 to 800 mm.
  • Shaft length up to 2500 mm.
  • Shaft and propeller AISI 316, AISI 304, carbon steel, rubber coated.

Optional Extras:

  • AISI 316 or PVC plate with oil seal.
  • Food industry execution, polished.
  • ATEX motors.
  • DIN or ANSI flanges
Download

VPP Series Agitator

VPP Series Industrial Agitator

VPP series are low running mixers specially designed for the mixing of quite viscous fluids. They are suitable for medium volume tanks up to 4 – 5 m3. Thanks to their life greased reducer gear it is a friendly maintenance machine just to connect and run. The S type axial profile propeller is designed to reach a balanced pumping flow/power absorption ratio. The propeller can be easily adjusted along the shaft if necessary, or it can be equipped with two or more propellers.

 

Main Features VPP Mixer:

  • For tanks 0,5 – 5 m3
  • Motor power: 0.18 kW to 2.2 kW.
  • Running speed 300 rpm (other speeds available).
  • 3 blades type S axialprofile propeller,
  • Diameter 200–400 mm.
  • Shaft length up to 1500 mm.
  • Shaft and propeller AISI 316, or polyethylene coated.

Optional Extras:

  • PVC or AISI 316 flange with oil seal.
  • Rubber coated shaft + propeller.
  • Food industry execution, polished.
  • ATEX motors.
  • DIN or ANSI flanges.
  • Special executions.
Download

Latest Insights

EcoTech is located in UAE and Saudi Arabia. Our head office is located in Hamriyah Free Zone in UAE.

View All News

Exciting Project Milestone

Thank You for a Successful Global Water Expo!

MENU '