KSA – Page 9 – EcoTech

Submersible Pumps

Pumps with Vortex Impeller

The UT-series is an economical type submersible vortex pump designed for handling raw sewage and wastewater from domestic and commercial areas. Rotation of the impeller produces vortex flow in the pump casing, which allows solid matters and fibrous materials to be pumped out with minimum contact to the impeller. Since this mechanism does not require those foreign matters to pass through the impeller vane, the pump offers practically unchokable pumping.

Performance Curves

Model Selection

Download

Slurry Pumps

The KRS-series of slurry-handling type is a submersible three-phase cast iron heavy-duty slurry pump driven by a 4-pole motor. It is equipped with a high-chromium cast iron agitator that assists smooth suction of the settled matters. The other wear parts such as the impeller and the suction plate are also made of high-chromium cast iron for extra durability. The top discharge, side flow design assures efficient motor cooling even when it operates with its motor exposed to air.

Performance Curves

Model Selection

Download

Slurry Pumps

The KTD-series is a submersible three-phase cast iron heavy-duty slurry pump. It is equipped with an agitator that assists smooth suction of the settled matters. The pump parts such as the impeller and the suction cover are made of wear-resistant materials. The top discharge, side flow design assures efficient motor cooling even when it operates with its motor exposed to air. The slim design allows the pump to be placed in a confined space.

Performance Curves

Model Selection

Download

Slurry Pumps

The KTV-series of slurry-handling type is a submersible three-phase portable slurry pump. It is equipped with an agitator that assists smooth suction of the settled matters. Though the pump is a three-phase unit, it is designed to weigh lighter for portability, yet it can be used for pumping slurry. The pump parts such as the impeller and the pump casing are made of wear-resistant materials. The top discharge, side flow design assures efficient motor cooling even when it operates with its motor exposed to air. The slim design allows the pump to be placed in a confined space.

Performance Curves

Model Selection

Download

Dewatering Pumps

Dewatering Pumps (Automatic)

The KTZE-series is a submersible three-phase automatic cast iron high head heavy-duty drainage pump. An innovative electrode type relay unit built into the pump automatically starts and stops the pump to eliminate dry-running. This mechanism greatly reduces power consumption and extends operating life. The cast iron body with high-chromium cast iron impeller enables it to withstand demanding conditions found in construction, aggregate and mining applications. The top discharge, side flow design assures efficient motor cooling even when it operates with its motor exposed to air. The slim design allows the pump to be placed in a confined space. The discharge direction is selectable between vertical and inclined, which prevents folding or bending of the discharge hose.

Registration of Design

Tsurumi KTZ-series has been registered of the design around the world (including the EU, the U.S. and China).The right on the design shall be granted under the law of each country.

Performance Curves

Model Selection

Download

Submersible SS Pumps

High-Head Corrosion-Resistant Pumps (Single Impeller)

The LH-14-series is a submersible stainless steel casting high head corrosion-resistant pump designed for handling aggressive and corrosive liquids. The all wetted parts are made of 316 stainless steel, enables it to withstand demanding conditions found in construction, aggregate and mining applications. Being the pump cylindrical and slim, it can be installed in a well casing for deep well dewatering. The center flange construction assures a stable installation even if it is fixed by the discharge pipe. The pump incorporates seal pressure relief ports that prevent the pumping pressure from applying to the shaft seal.

Performance Curves

Model Selection

Download

Submersible SS Pumps

High-Head Corrosion-Resistant Pumps (Dual Impellers)

The LH-W-14-series is a submersible stainless steel casting high head corrosion-resistant pump having dual impellers designed for handling aggressive and corrosive liquids. The all wetted parts are made of 316 stainless steel, enables it to withstand demanding conditions found in construction, aggregate and mining applications. Being the pump cylindrical and slim, it can be installed in a well casing for deep well dewatering. The center flange construction assures a stable installation even if it is fixed by the discharge pipe. The pump incorporates seal pressure relief ports that prevent the pumping pressure from applying to the shaft seal.

Performance Curves