UAE – EcoTech

Long-coupled

The process pumps of UNIVERS P series were constructed especially for hard use in pumping stations and sewage treatment plants with direct operation via coupling or V Belt Drive. Reliability and long operating periods together with the highest possible efficiency are priorities during development – these factors all combine to achieve very low life cycle costs. The higher flywheel mass inertia made possible in the design minimises the impact of water hammer in the pipeline system.

Focus

Available in stainless steel

Download

Belt driven

The UNIVERS-P is designed for use in raw sewage transport. High loads don’t cause the sewage pump any problems.

Pump description
The “soft” pump for hard materials. Pumps of type UNIVERS-P-SG can easily deal with sand and many dif-ferent abrasive materials in your pumped medium. The soft interior lining with a special rubber lining for the parts at risk of wear prevents abrasive wear and ensures a long lifetime. Here, the pump represents the ideal example for reducing the life-cycle costs (LCC) by means of intelligent pump selection.
Process pumps of the UNIVERS-P-SG construction series are particularly suited for the transport of pumped media with un-predictable and extreme contamination with abrasive materials. No other pump demonstrates our capacity for innovation quite like this one

Focus
Stainless steel available

Download

In inline-block pump

100% coated centrifugal pump in inline-block design
Flexible , innovative and powerful all at the same time

Pump Description
The coated herborner.D in-line block pump is suitable for all applications where the medium must not be contaminated by corrosion products, and direct in-line installation is required. Up to 500 µm coating provides an extremely smooth surface. Hydraulic efficiency is boosted by about 10%, offering energy savings over years.

Focus
Compact design
Stainless steel available
Particularly high efficiency

Download

Pool pump

Compact coated swimming pool pump with coated impeller, plastic pre-filter and permanent-magnet-motor

Pump Description:
For the private and small hotel pool market the self-priming herborner.XSneo with integrated hair and fibre filter is of utmost importance due to its maximum efficiency. The new generation of pumps offers maximum energy and cost savings at every operating point where the pumps can be used. This is made possible in part by the combination of a pump with an IE5 permanent magnet motor and a specially adapted frequency inverter. The herborner.XSneo pumps are fully smooth-coated from the inside and guarantee maximum protection against wear, corrosion and deposits.

Focus
Self-priming
Compact design
Stainless steel available
Particularly high efficiency

Download

Integrated pre-filter

100% coated pool water circulation pump with integrated pre-filter.

Pump description
The coated pool water circulation pump herborner.X with a unique 100% coating and integrated pre-filter. The coating thickness of around 500 μm ensures an extremely smooth surface. This improves the hydraulic efficiency by up to 10% depending on the operating point and saves energy over the years.

Focus
Compact design
Available in stainless steel
Particularly high efficiency

Download