Loading...

Vertical Screw Conveyors

Vertical Screw Conveyors

The mechanics, the function and the materials used, 314L or 316L stainless steel are the same as the horizontal screw conveyors, the difference is that the material to be transported is raised.
SEFT performs the co-design with the customer and the customized manufacturing of the screw conveyors according to the individual needs of transport or dosage.
Advantages of Vertical Screw Conveyors:
– Customized equipment
– Absence of blockages and blockages
– Fibrous materials
– Reduced and very simple maintenance
– Transport area completely closed
– Transporting materials of different nature
– Reduced rotation speed
– Absence of intermediate supports

Static Mixers

QDS static mixers

The QDS (Quick Time Delivery System) static mixers can be delivered within a few days following your order and at very competitive prices. With QDS static mixers PRIMIX delivers the advanced technology of bespoke static mixers in standardized variants.

Drainage Pumps

Submersible Drainage Pumps Jacket Cooled for Abrasive Drainage Water – HBP501-HBP555

 

Design

Fully submersible drainage pump consisting of:

  • Pump: Single stage centrifugal pump with the discharge on top.
  • Impeller: open multi-channel impeller
  • Motor: pressure tight, jacket cooled motor, insulation class F, Motor protection IP 68. Cable connection chamber totally isolated from motor housing. With thermal sensor embedded in motor winding. Connection cable: HBP501-507: H07RN8-F4G1 HBP512: H07RN8-F4G1.5 HBP522-555: H07RN8-F4G2.5
  • Shaft/Bearing: generously-proportioned chromium steel motor shaft, permanently-lubricated roller bearing.
  • Seals: Shaft seal combined with a double action mechanical seal in oil bath.

Submersible Pumps

Electric Submersible Pumps for Waste Water Containing Solids. Spherical Clearance 30 and 42 mm – TP30

 

Design

Fully submersible, compact integrated motor-pump unit consisting of:

  • Pump: Single stage centrifugal pump with horizontal discharge BSP 2“M.
  • Impeller: M = Open single channel impeller for liquids containing impurities and sludge with solid particles. V = Vortex impeller for liquids containing a high level of impurities or fibrous matter and containing gas.
  • Motor: Fully submersible, pressure tight electric motor, oil filled. Insulation class H. Degree of protection IP 68. Thermal sensors embedded in the winding on request (standard with model Ex). Cable: H07 RN – F4 G 1.5 Model Ex: H07 RN – FPlus6 G 1.5
  • Shaft/Bearing: Large diameter stainless rotor shaft, pre-lubricated bearings.
  • Seals: Combination of mechanical seals (silicon-carbide/silicon-carbide) and lip seals in a separate oil chamber. Explosion protection: All models available with explosion proof motors according to II 2 G Ex c d II B T4(T3)

Submersible Pumps

Submersible Pumps for Domestic Waste Water Containing Solids. Spherical Clearance 28 mm – TP28

 

Construction

Fully submersible pump, consisting of:

  • Pump: Single stage centrifugal pump with horizontal pressure connection.
  • Impeller: M= Open single channel impeller for liquids containing impurities and sludge with solid particles. V = Vortex impeller for liquids containing a high level of impurities or fibrous matter and containing gas.
  • Motor: Fully immersible motor, sealed against pressurised water, oil-filled. Insulation class H, protection rating IP 68. W (A)-Models with thermal sensor embedded in the winding. Electrical compartment is separate from motor. Connection cable: H07RN-F 4G1,5 TP28V W(A): H07RN-F 3G1,0
  • Shaft/Bearing: Generously-proportioned chromium steel motor shaft, permanently-lubricated roller bearing.
  • Seals: Combination of mechanical seal (silicon carbide/silicon carbide) and radial seal that is independent of the direction of rotation.

Submersible Pumps

Submersible Pumps for Domestic Waste Water Containing Solids. Spherical Clearance 50 mm – TP48

 

Construction

Fully submersible pump consisting of:

  • Pump: Single stage centrifugal pump with horizontal pressure connection. Impellers: M= Open single channel impeller for liquids containing impurities and sludge with solid particles. V = Vortex impeller for liquids containing a high level of impurities or fibrous matter and containing gas.
  • Motor: Fully immersible motor, sealed against pressurised water, oil-filled. Insulation class H, protection rating IP 68. W (A)-Models with thermal sensor embedded in the winding. Electrical compartment is separate from motor. Connection cable: H07RN-F 4G1.5 Type WA: H07RN-F 5G1.5
  • Shaft/Bearing: Generously-proportioned chromium steel motor shaft, permanently-lubricated roller bearing.
  • Seals: Combination of mechanical seal (silicon carbide/silicon carbide) and radial seal that is independent of the direction of rotation.

Drainage Pumps

Wear Resistant Submersible Drainage Pumps for Clear Water and Domestic Waste Water – H16

 

Construction

Fully submersible pump, consisting of:

  • Pump: Single stage centrifugal pump with horizontal pressure connection. Impeller: Open multi-channel impeller, spherical clearance 10 mm.
  • Motor: Fully immersible motor, sealed against pressurised water, oil-filled. Insulation class H, protection rating IP 68. Thermostat sensor for temperature monitoring in the winding. Electrical compartment is separate from motor. Connecting cable: H07RN-F3G1
  • Shaft/Bearing: Generously-proportioned chromium steel motor shaft, permanently-lubricated roller bearing.
  • Seals: Triple radial seal.

Drainage Pumps

Submersible Drainage Pumps Jacket Cooled for Clear Water Drainage Water –  H501/H511

 

Design

Fully submersible, compact integrated motor-pump unit consisting of:

  • Pump: Single stage centrifugal pump with vertical discharge. Impeller: Open multi-channel impeller, spherical clearance 10 mm.
  • Motor: Fully submersible, pressure tight electric motor, oil-filled. Insulation class F. Motor protection IP 68. Cable connection chamber totally isolated from motor housing. All 1 phase models with thermal sensors embedded in motor winding. Cable: Model W: H07RN-F3G1 H502WA, H506WA: H07RN-F4G1 Model D: H07RN-F4G1 H508W: H07RN-F4G1 H508WA: H07RN-F5G1 H511: H07RN-F4G1.5
  • Shaft/Bearing: Large diameter stainless steel rotor shaft, pre-lubricated bearings.
  • Seals: Combination of mechanical seals with lip seal.